Students or teams should schedule the correct lab exercise from the catalog. If a lab is supported on more than one pod type, the lab will appear once for each installed pod type.
Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.
Several of the labs differ from the standard pod topologies. This is handled by NETLAB's Dynamic VLAN Mapping technology. Always select the correct lab exercise for the actual lab. This insures that NETLAB will set up VLANs on the control switch such that lab devices and PC's are placed in the correct LAN segment for the exercise being performed.
| Course | Lab | Description | BRPv1 | BRPv2 | CRP | Comments |
|---|---|---|---|---|---|---|
| CCNA2 | 2.2.1 | Router Configuration Using Setup | Yes | Yes | Yes | PCs not required |
| CCNA2 | 2.2.9 | Command Line Fundamentals | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.2 | Command Modes and Router Identification | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.3 | Configuring Router Passwords | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.4 | Using Router show Commands | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.5 | Configuring a Serial Interface | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.6 | Making Configuration Changes | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.1.7 | Configuring an Ethernet Interface | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.2.3 | Configuring Interface Descriptions | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.2.5 | Configuring Message-of-the-Day (MOTD) | Yes | Yes | Yes | PCs not required |
| CCNA2 | 3.2.7 | Configuring Host Tables | Yes | Yes | Yes | PCs not required |
| CCNA2 | 4.1.6 | Using CDP Commands | Yes | Yes | Yes | PCs not required |
| CCNA2 | 4.2.2 | Establishing and Verifying a Telnet Connection | Yes | Yes | Yes | PCs not required |
| CCNA2 | 4.2.3 | Suspending and Disconnecting Telnet Sessions | Yes | Yes | Yes | PCs not required |
| CCNA2 | 4.2.4 | Advanced Telnet Operations | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 4.2.5a | Connectivity Tests - Ping | Yes | Yes | Yes | PCs supported using BRP V2 |
| CCNA2 | 4.2.5b | Connectivity Tests - Traceroute | Yes | Yes | Yes | PCs supported using BRP V2 |
| CCNA2 | 4.2.6 | Troubleshooting IP Address Issues | Yes | Yes | Yes | PCs supported using BRP V2 |
| CCNA2 | 5.1.3 | Using the Boot System Command | Yes | Yes | Yes | PCs not required |
| CCNA2 | 5.1.5 | Troubleshooting Configuration Register Boot Problems | Yes | Yes | Yes | PCs not required |
| CCNA2 | 5.2.3 | Managing Configuration Files with TFTP | No | Yes | Yes | PCs and TFTP server software required |
| CCNA2 | 5.2.5 | Managing IOS Images with TFTP | No | No | No | lab not recommended and not listed |
| CCNA2 | 5.2.6a | Password Recovery Procedures | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 6.1.6 | Configuring Static Routes | Yes | Yes | Yes | PCs not required |
| CCNA2 | 7.2.2 | Configuring RIP | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 7.2.6 | Troubleshooting RIP | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 7.2.9 | Load Balancing Across Multiple Paths | No | Yes | Yes | dual Ethernet routers required |
| CCNA2 | 7.3.5 | Configuring IGRP | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 7.3.6 | Default Routing with RIP and IGRP | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 7.3.8 | Unequal Cost Load Balancing with IGRP | No | Yes | Yes | dual Ethernet routers required |
| CCNA2 | 9.1.1 | Using show ip route to Examine Routing Tables | No | Yes | Yes | dual Ethernet routers required |
| CCNA2 | 9.1.2 | Gateway of Last Resort | Yes | Yes | Yes | PCs not required |
| CCNA2 | 9.1.8 | Last Route Update | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 9.3.4 | Troubleshooting Using traceroute | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 9.3.5 | Troubleshooting Routing Issues with show ip Commands | Yes | Yes | Yes | PCs recommended |
| CCNA2 | 9.3.7 | Troubleshooting Routing Issues with debug | Yes | Yes | Yes | PCs not required |
| CCNA2 | 10.1.6 | Multiple Active Host Sessions | No | Yes | Yes | PCs required |
| CCNA2 | 10.2.5 | Well-Known Port Numbers and Multiple Sessions | No | Yes | Yes | PCs required |
| CCNA2 | 11.2.1a | Configuring Standard Access Lists | No | Yes | Yes | PCs required |
| CCNA2 | 11.2.1b | Standard ACLs | No | Yes | Yes | PCs required |
| CCNA2 | 11.2.2a | Configuring Extended Access Lists | No | Yes | Yes | PCs required |
| CCNA2 | 11.2.2b | Simple Extended Access Lists | No | Yes | Yes | PCs required, R3 is substituted for payroll server |
| CCNA2 | 11.2.3a | Configuring a Named Access List | No | Yes | Yes | PCs required |
| CCNA2 | 11.2.3b | Simple DMZ Extended Access Lists | No | Yes | Yes | PCs required, R3 can be substituted for web server |