Multi-Purpose Academy Pod - Quick Reference Page
This quick reference page provides a summary of the specifications
of this topology. For a complete reference including installation details,
please refer to the Multi-purpose Academy Pod Planning and Installation Guide 
CCNA Security labs require different console and enable secret password settings from other courses. Please review the information on enabling CCNA Security labs.
CCNP V6.0 TSHOOT labs require different console and enable secret password settings from other courses. Please review the information on enabling CCNPv6.0 TSHOOT labs.
| Topology | Maximum Per System1 | Supports | Documentation |
|---|---|---|---|
|
8 |
Planning and Installation Guide
|
1This value indicates the maximum number of pods of this pod type. A single NETLABAE system can host up to 12 equipment pods, total.
Lab Topology
Lab Device Requirements
Lab devices are part of the topology and users can interact with them either directly through the console or network.
Hardware compatibility with NETLABAE does not guarantee the compatibility of labs. Please check the Academy curriculum, NDG pod guides, and lab support pages for specific hardware and IOS requirements.
The Multi-Purpose Academy Pod includes three routers (R1, R2 and R3) and three switches (S1, S2 and S3). The tables below indicate the recommended devices, based on the hardware lists provided by Cisco.
The lab device requirements vary for the Multi-purpose Academy Pod, depending on whether you plan to use the pod for the CCNPv6.0 TSHOOT course.
Lab Device Requirements for CCNA Security, Discovery and Exploration
The lab device requirements in the section may be used if you plan to teach CCNA Security, Exploration and/or Discovery courses.
| Router / Switch |
Recommended Model(s)1 |
Minimum DRAM2 |
Minimum IOS |
Feature Set |
|---|---|---|---|---|
| R1 | Cisco 1841 | 192 MB | 12.4(20)T1 | Advanced IP Services |
| R2 | Cisco 1841 | 128 MB | 12.4(20)T1 | IP Base |
| R3 | Cisco 1841 | 192 MB | 12.4(20)T1 | Advanced IP Services |
| S1 | Cisco 2960 | LAN Base Image | ||
| S2 | Cisco 2960 | LAN Base Image | ||
| S3 | Cisco 2960 | LAN Base Image |
1Other router and switch models may be used. Please consult your Cisco NetAcad support contact for more information.
2DRAM memory requirements when used to support the CCNA Security course.
Lab Device Requirements for CCNPv6.0 TSHOOT
The information provided in this table is based on the specifications
of the beta release of CCNP v6.0 TSHOOT. This information is subject to change.
If the Multi-purpose Academy Pod (MAP) is built based on the CCNPv6.0 TSHOOT
lab device requirements specified in the table below, the pod may also be used
for CCNA Security, Discovery and Exploration.
| Router / Switch |
Recommended Model(s)1 |
Minimum DRAM2 |
Minimum IOS |
Feature Set |
|---|---|---|---|---|
| R1 | Cisco 1841 | 192 MB | 12.4(20)T1 | Advanced IP Services |
| R2 | Cisco 1841 | 128 MB | 12.4(20)T1 | Advanced IP Services |
| R3 | Cisco 1841 | 192 MB | 12.4(20)T1 | Advanced IP Services |
| S1 | Cisco 3560 | Catalyst 3560-24PS IP Services Image1 | ||
| S2 | Cisco 2960 | Catalyst 2960 24 10/100 + 2 1000BT LAN Base Image | ||
| S3 | Cisco 3560 | Catalyst 3560-24PS IP Services Image |
1Other router and switch models may be used. Please consult your Cisco NetAcad support contact for more information.
2DRAM memory requirements when used to support the CCNPv6.0 TSHOOT course.
Router Interfaces
The NETLABAE interface name translation feature is supported on this pod type. This may influence the selection of modular interface cards and slot placement within the router. Please review the expected interface names for each router.
Virtual PC Support
Remote PCs are implemented by integrating with 3rd party virtualization products. The NETLABAE documentation library includes several guides with extensive detail on the implementation of virtualization with your NETLAB+ system.
The following operating system choices are typical based on the curriculum. These choices are not mandatory; you can make substitutions provided that:
- Your choice of NETLAB+ supported virtualization product supports the operating system (as a guest).
- Your choices are compatible with the curriculum.
Only virtual machines are supported on this topology. Standalone PCs are not supported.
The Multi-Purpose Academy Pod supports three (3) virtual machines.
| Virtual Machine | Recommended O/S |
Functions | VLAN Offset1 |
|---|---|---|---|
| PC A | Windows XP | Student PC, client activities | +0 |
| PC B | Windows XP | Student PC, client activities | +1 |
| PC C | Windows XP | Student PC, client activities | +3 |
Control Device Requirements
Control devices provide internal connectivity, console access, and managed power. Control devices are dynamically managed by NETLABAE and are not accessible or configurable by end users.
- Control switches provide connectivity between devices in the pod.
- Access server lines provide console connections to lab equipment.
- Switched outlets provide managed electrical power, allowing NETLABAE and users to turn lab equipment on and off.
Control Device Requirements for the Multi-purpose Academy Pod
| Control Device Resource | Quantity Required |
|---|---|
| Control Switch | 8 Consecutive Ports |
| Access Server | 6 Lines |
| Switched Outlet Devices | 6 Outlets |
The Multi-Purpose Academy Pod requires 8 consecutive ports on a control switch.
The Multi-Purpose Academy Pod requires 6 async ports on an access server.
The Multi-Purpose Academy Pod requires 6 outlets on a switched outlet device.
For More Information
Please refer to the Multi-purpose Academy Pod Planning and Installation Guide