Home Product Requirements Pricing Ordering Support Sharing Contact
General Lab Devices Control Devices Remote PC

Supported Lab Devices

Lab devices are part of the topology and users can interact with them either directly through the console or indirectly via Telnet and other protocols.

Supported Routers

The table below lists the Cisco router models supported by NETLABAE and the interface names that are expected by the name translation feature.

Please Note: Some NETLABAE pod types support interface name translation. This feature allows configuration files saved by NETLABAE to be loaded, without errors, on a different pod with different router types. As a configuration is loaded, NETLABAE will substitute the correct interface names for the actual router types being used (if necessary). To do this, NETLABAE maintains a fixed table of interface names that should present on each router model. This may influence the selection of modular interface cards and slot placement within the router.

IOS Requirement: NETLABAE supports IOS 12.0(5)T and higher on all routers.

Cisco Router Model Required Interface Names
  1st Ethernet 2nd Ethernet 1st Serial 2nd Serial
831 Ethernet0 Ethernet1 N/A N/A
837 Ethernet0 N/A N/A N/A
1720 FastEthernet0 N/A1,2 Serial0 Serial1
1721 FastEthernet0 N/A1,2 Serial0 Serial1
1751-V FastEthernet0/0 N/A1,2 Serial0/0 Serial0/1
1751 FastEthernet0/0 N/A1,2 Serial0/0 Serial0/1
1760-V FastEthernet0/0 N/A1,2 Serial0/0 Serial0/1
1760-V (two WIC-1T) FastEthernet0/0 N/A1,2 Serial0/0 Serial1/0
1760 FastEthernet0/0 N/A1,2 Serial0/0 Serial0/1
1760 (two WIC-1T) FastEthernet0/0 N/A1,2 Serial0/0 Serial1/0
1841 (S0/0/x) FastEthernet0/0 FastEthernet0/1 Serial0/0/0 Serial0/0/1
1841 (S0/1/x) FastEthernet0/0 FastEthernet0/1 Serial0/1/0 Serial0/1/1
1841 (no serial) FastEthernet0/0 FastEthernet0/1 N/A N/A
2501 Ethernet0 N/A Serial0 Serial1
2503 Ethernet0 N/A Serial0 Serial1
2509 Ethernet0 N/A Serial0 Serial1
2511 Ethernet0 N/A Serial0 Serial1
2513 Ethernet0 N/A Serial0 Serial1
2514 Ethernet0 Ethernet1 Serial0 Serial1
2520 Ethernet0 N/A Serial0 Serial1
2522 Ethernet0 N/A Serial0 Serial1
2524 Ethernet0 N/A Serial0 Serial1
2610 Ethernet0/0 N/A Serial0/0 Serial0/1
2610XM FastEthernet0/0 N/A Serial0/0 Serial0/1
2611 Ethernet0/0 Ethernet0/1 Serial0/0 Serial0/1
2611XM FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2612 Ethernet0/0 N/A Serial0/0 Serial0/1
2620 FastEthernet0/0 N/A Serial0/0 Serial0/1
2620XM FastEthernet0/0 N/A Serial0/0 Serial0/1
2621 FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2621XM FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2650 FastEthernet0/0 N/A Serial0/0 Serial0/1
2650XM FastEthernet0/0 N/A Serial0/0 Serial0/1
2651 FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2651XM FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2691 FastEthernet0/0 FastEthernet0/1 Serial0/0 Serial0/1
2801 (S0/0/x) 3 FastEthernet0/0 FastEthernet0/1 Serial0/0/0 3 Serial0/0/1 3
2801 (S0/1/x) FastEthernet0/0 FastEthernet0/1 Serial0/1/0 Serial0/1/1
2801 (S0/2/x) FastEthernet0/0 FastEthernet0/1 Serial0/2/0 Serial0/2/1
2801 (S0/3/x) FastEthernet0/0 FastEthernet0/1 Serial0/3/0 Serial0/3/1
2801 (no serial) FastEthernet0/0 FastEthernet0/1 N/A N/A
2811 (S0/0/x) FastEthernet0/0 FastEthernet0/1 Serial0/0/0 Serial0/0/1
2811 (S0/1/x) FastEthernet0/0 FastEthernet0/1 Serial0/1/0 Serial0/1/1
2811 (S0/2/x) FastEthernet0/0 FastEthernet0/1 Serial0/2/0 Serial0/2/1
2811 (S0/3/x) FastEthernet0/0 FastEthernet0/1 Serial0/3/0 Serial0/3/1
2811 (no serial) FastEthernet0/0 FastEthernet0/1 N/A N/A
2821 (S0/0/x) GigabitEthernet0/0 GigabitEthernet0/1 Serial0/0/0 Serial0/0/1
2821 (S0/1/x) GigabitEthernet0/0 GigabitEthernet0/1 Serial0/1/0 Serial0/1/1
2821 (S0/2/x) GigabitEthernet0/0 GigabitEthernet0/1 Serial0/2/0 Serial0/2/1
2821 (S0/3/x) GigabitEthernet0/0 GigabitEthernet0/1 Serial0/3/0 Serial0/3/1
2821 (no serial) GigabitEthernet0/0 GigabitEthernet0/1 N/A N/A
1The WIC-1ENET module is no longer supported as a second Ethernet interface.
2The Cisco 1700 series cannot be used in the Basic Switch Pod or Advanced Switch Pod.
3Serial0/0/x is currently not supported on the Cisco 2801 since slot 0 is a VIC slot.

Lab Switches

This table lists the Cisco switch models supported by NETLABAE.

Please Note: This table lists switch types that can be used in lab pods. Switches that can be used as NETLABAE control switches are listed on the control devices page.

Cisco Switch Model IOS Requirement
1912EN Enterprise Edition 9.00.04 or higher
1924EN Enterprise Edition 9.00.04 or higher
2912XL 12.0(5)WC5a
2924XL 12.0(5)WC5a
2950-12 12.1(22)EA2 or higher
2950-24 12.1(22)EA2 or higher
2950G-12-EI 12.1(22)EA2 or higher
2950G-24-EI 12.1(22)EA2 or higher
2950G-48-EI 12.1(22)EA2 or higher
2950T-24-EI 12.1(22)EA2 or higher
2960-24 12.2.25
2960-48 12.2.25
3550-24 EMI 12.1(22)EA2 or higher
3550-24 SMI 12.1(22)EA2 or higher
3550-12G 12.1(22)EA2 or higher
3550-12T 12.1(22)EA2 or higher
3560 Series 12.2.35

Firewalls

Cisco Device Model IOS Requirement SDM Image Management Image Files
ASA5510 IOS 7.0(6) or higher automatic, SDM 5.0(6) or higher2 asa706-k8.bin
asdm506.bin
PIX515E 6.3(4)
7.0(X)
7.1(X)
7.2(X)
 manually loaded pix634.bin
pix70X.bin
pix71X.bin
pix72X.bin
PIX506E1 6.3(4) n/a pix634.bin
PIX5011 6.3(4) n/a pix634.bin
1These models do not support a DMZ.
2SDM image versions are tied to specific IOS versions

 
Copyright © Network Development Group. NETLAB+, NETLAB Academy Edition, and NETLAB Professional Edition are registered trademarks of Network Development Group. Cisco and Networking Academy are registered trademarks of Cisco Systems.