All NETLAB+ supported labs in the CCNA2: Switching, Routing, and Wireless Essentials Essentials course are supported by the Multi-Device Pod (MDP), NETLAB+ VE 19.5.0 or greater is required.
|Lab Number||Title||Pod Required|
|1.1.7||Basic Switch Configuration||MDP|
|1.6.2||Configure Basic Router Settings||MDP|
|3.4.6||Configure VLANs and Trunking||MDP|
|3.6.2||Implement VLANs and Trunking||MDP|
|4.2.8||Configure Router-on-a-Stick Inter-VLAN Routing||MDP|
|4.4.9||Troubleshoot Inter-VLAN Routing||MDP|
|4.5.2||Implement Inter-VLAN Routing||MDP|
|11.6.2||Switch Security Configuration||MDP|
|15.6.2||Configure IPv4 and IPv6 Static and Default Routes||MDP|
|16.3.2||Troubleshoot IPv4 and IPv6 Static and Default Routes||MDP|
To enable the CCNA2: Switching, Routing, and Wireless Essentials v7.0 labs, install the CCNA2: Switching, Routing, and Wireless Essentials v7.0 course using the Course Manager. See the Course Manager section of the NETLAB+ VE Admin Guide for details. The course content will then be available to be added to classes.
Always select the correct lab exercise for the lab being performed. Students or teams should schedule the correct lab exercise from the catalog. NETLAB+ will only show those labs for which the required pod type is available. A lab that works on different pod types may appear more than once if your system is so equipped. Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.
Importance of Choosing the Correct Lab Exercise
Several of the labs may differ from the standard pod topologies. This is handled by NETLAB+ Dynamic VLAN Mapping technology. Always select the correct lab exercise for the actual lab. This insures that NETLAB+ will set up VLANs on the control switch such that lab devices and PCs are placed in the correct LAN segment for the exercise being performed. Selecting the correct exercise will also make the completed lab output easier to find in the archive.