CCNA Introduction to Networks v6

All NETLAB+ supported labs in the CCNA1 Routing and Switching - Introduction to Networks v6 course are supported by both the Multi-purpose Academy Pod (MAP) and Multi-purpose Academy Pod w/ASA (MAP w/ASA).

Supported Labs

Lab Number Title Pod Required
0.0.0.1 Initializing and Reloading a Router and Switch MAP or MAP w/ASA
2.3.3.3 Building a Simple Network MAP or MAP w/ASA
2.3.3.4 Configuring a Switch Management Address MAP or MAP w/ASA
3.4.1.2 Using Wireshark to View Network Traffic MAP or MAP w/ASA
5.1.1.7 Using Wireshark to Examine Ethernet Frames MAP or MAP w/ASA
5.1.2.8 Viewing Network Device MAC Addresses MAP or MAP w/ASA
5.2.1.7 Viewing the Switch MAC Address Table MAP or MAP w/ASA
6.3.2.7 Exploring Router Physical Characteristics MAP or MAP w/ASA
6.5.1.2 Building a Switch and Router Network MAP or MAP w/ASA
7.2.5.3 Identifying IPv6 Addresses MAP or MAP w/ASA
7.2.5.4 Configuring IPv6 Addresses on Network Devices MAP or MAP w/ASA
7.3.2.7 Testing Network Connectivity with Ping and Traceroute MAP or MAP w/ASA
8.1.4.8 Designing and Implementing a Subnetted IPv4 Addressing Scheme MAP or MAP w/ASA
8.2.1.5 Designing and Implementing a VLSM Addressing Scheme MAP or MAP w/ASA
9.2.4.3 Using Wireshark to Examine TCP and UDP Captures MAP or MAP w/ASA
11.2.4.6 Accessing Network Devices with SSH MAP or MAP w/ASA
11.2.4.7 Examining Telnet and SSH in Wireshark MAP or MAP w/ASA
11.2.4.8 Securing Network Devices MAP or MAP w/ASA
11.3.4.6 Using the CLI to Gather Network Device Information MAP or MAP w/ASA
11.4.3.5 Troubleshooting Connectivity Issues MAP or MAP w/ASA
Appendix Observing ARP with the Windows CLI, IOS CLI, and Wireshark MAP or MAP w/ASA
SBA Skills-Based Assessment MAP or MAP w/ASA
Enabling the Labs

To enable the CCNA Routing and Switching - Introduction to Networks 6 labs, create a class and check the appropriate global labs in the class settings as described in the table below, depending on the pod(s) that will be used. You may also select the Skills-Based Assessment, as indicated in the table below.

MAP MAP
Pods Global Labs Instructions
Multi-purpose Academy Pod AE CCNARS ITN v6.0 - MAP - English On the Global Labs section of the class settings, check the "AE CCNARS ITN v6.0 - MAP - English" if the MAP will be used to perform the labs.
Multi-purpose Academy Pod w/ASA AE CCNARS ITN v6.0 - MAPASA - English On the Global Labs section of the class settings, check the "AE CCNARS ITN v6.0 - MAPASA - English" if the MAP w/ASA will be used to perform the labs.
Multi-purpose Academy Pod AE CCNARS ITN SBA v6.0 - MAP - EN On the Global Labs section of the class settings, check the "AE CCNARS ITN SBA v6.0 - MAP - EN" if the MAP will be used to perform the SBA.
Multi-purpose Academy Pod w/ASA AE CCNARS ITN SBA v6.0 - MAPASA - EN On the Global Labs section of the class settings, check the "AE CCNARS ITN SBA v6.0 - MAPASA - EN" if the MAP w/ASA will be used to perform the SBA.

The Multi-purpose Academy Pod (MAP) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "Multi-purpose Academy Pod (no labs)" in the class settings.

The Multi-purpose Academy Pod with ASA (MAP w/ASA) is also available for "pod-only" reservations. To enable pod-only reservations, select the check box for "AE MAP w/ ASA (no labs)" in the class settings.

"Pod-only" reservations are not tied to specific lab exercises. Therefore, the pod will be configured using the default network configuration and will not be properly configured to complete CCNA Routing and Switching - Introduction to Networks labs.

Using the Labs

Always select the correct lab exercise for the lab being performed. Students or teams should schedule the correct lab exercise from the catalog. NETLAB+ will only show those labs for which the required pod type is available. A lab that works on different pod types may appear more than once if your system is so equipped. Instructors should select the correct lab from the Exercise tab during instructor-led lab reservations. This can be done as many times as needed during the reservation.

Importance of Choosing the Correct Lab Exercise

Several of the labs may differ from the standard pod topologies. This is handled by NETLAB+ Dynamic VLAN Mapping technology. Always select the correct lab exercise for the actual lab. This insures that NETLAB+ will set up VLANs on the control switch such that lab devices and PCs are placed in the correct LAN segment for the exercise being performed. Selecting the correct exercise will also make the completed lab output easier to find in the archive.