Cisco Standard Topology Configurations

NETLAB+ AE & PE Customers: Please refer to the NETLAB+ AE & PE Control Devices page.


To simplify equipment purchasing, we have organized equipment requirements by pod type. Since these requirements change over time, we further categorized as Configuration A, Configuration B, Configuration C, etc... with the most recent configuration listed first.

  • The latest configuration will always be recommended for new purchases.
  • Earlier configurations are supported for reference until the equipment no longer supports the requirements of the Cisco Networking Academy.
  • Configuration A contains hardware from the earliest bundle supported by NETLAB+ VE.
 

MAP ASA D - Cisco Standard Topology Configuration

Qty Product Number Description Software Version> Device Names Notes
3 ISR4321-SEC/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,Sec bundle) IP Security isr4300-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin R1, R2, R3  
3 NIM-2T= 2-Port Serial WAN Interface Card       1
3 CAB-SS-V35MT= V.35 Cable, DTE Male to Smart Serial, 10 Feet        
3 CAB-SS-V35FC= V.35 Cable, DCE Female to Smart Serial, 10 Feet        
1 WS-C2960+24TC-L Catalyst 2960 24 10/100 + 2 1000BT LAN Base Image LAN BASE c2960-lanbasek9-mz.150-2.SE7.bin S2  
2 WS-C3650-24TS-E Cisco Catalyst 3650 24 Port Data 4x1G Uplink IP Services IP Services cat3k_caa-universalk9.SPA.03.06.05.E.152-2.E5.bin S1, S3  
1 ASA5505-BUN-K9 Adaptive Security Appliance (ASA) Model 5505 ASDM 74.1   asa923-k8.bin ASA  
5   6-foot Cat5e Cable (straight)        
5   3-foot Cat5e Cable (straight)        
10   1-foot Cat5e Cable (crossover)        
Notes
  1. Not supported by 1921, 1941, 2901, 2911 router.